新聞中心

        EEPW首頁 > 模擬技術 > 設計應用 > TI TPA6140A2 G類立體聲耳機放大電路設計

        TI TPA6140A2 G類立體聲耳機放大電路設計

        作者: 時間:2011-09-30 來源:網絡 收藏

        耳機設計

        公司的和TPA6141A2是25mW 耳機放大器,它的系統級音樂播放時間比AB類放大器提高了20%.這兩個器件采用DirectPath技術,不需要大的隔直流電容和開關機抑制電路,增強了聽覺效果.小型封裝,超低功耗和高質量音頻保真,使它們非常適合手提設備應用如手機/智能手機和MP3播放器.本文介紹了和TPA6141A2的主要特性和指標, 功能方框圖以及差分輸入,單端輸入的應用配置圖.此外還介紹了評估模塊的主要特性,詳細電路和所用元件清單。

        TPA6140A2: CLASS-G DIRECTPATH STEREO HEADPHONE AMPLIFIER WITH I2C VOLUME CONTROL

        ’s new TPA6140A2 and TPA6141A2 25-mW Class-G stereo headphone amplifiers improve system-level music playback time by 20 percent over Class-AB technology in the best-in-class music phones shipping today. DirectPath technology eliminates the need for large DC-blocking capacitors and pop-suppression circuitry improves the listening experience. Small package size, ultra-low power consumption and high audio fidelity makes these devices ideal for portable applications such as mobile/smart phones and MP3 players.

        TPA6140A2主要指標:

        TI TPA6140A2 G類立體聲耳機放大電路設計

        TPA6140A2主要特性:

        Consume 0.6-mA/channel quiescent current and deliver 5 mW/channel into a 32-Ω load, while keeping the total supply current below 5 mA

        Enable energy-efficient system when coupled with TI’s low-power audio converters, speaker amplifiers, OMAP 3 processors and TMS320C550x and TMS320C540x devices

        Variable and fixed gain options:

        TPA6140A2: –59-dB to +4-dB variable gain range programmable via a 32-step I2C volume control

        TPA6141A2: 0-dB or +6-dB fixed gain

        Separate SGND pin reduces ground loop noise when interfacing with a non-headphone accessory

        Key Applications:

        Mobile/smart phones

        Portable media/MP3 players
        TI TPA6140A2 G類立體聲耳機放大電路設計
        圖1.TPA6140A2功能方框圖

        TI TPA6140A2 G類立體聲耳機放大電路設計
        圖2.TPA6140A2差分輸入應用配置圖

        TI TPA6140A2 G類立體聲耳機放大電路設計
        圖3.TPA6140A2單端輸入應用配置圖

        TPA6140A2評估模塊(EVM)

        The TPA6140A2 is a DirectPath Class-G stereo headphone amplifier with a built-in I2C volume control. Class-G technology maximizes battery life by adjusting the voltage supplies of the headphone amplifier based on audio signal level. DirectPath eliminates external DC-blocking capacitors. Availability in a 0.4 mm pitch WCSP package makes TPA6140A2 an ideal choice for both cellular handsets and PDAs.

        The TPA6140A2 evaluation module (EVM) is a complete, stand-alone audio board. It contains the TPA6140A2 WCSP (YFF) Class-G stereo headphone amplifier.

        The TPA6140A2YFFEVM allows the engineer to evaluate the TPA6140A2, a stereo Class-G DirectPath (capacitor-free) headphone amplifier in a WCSP package. The TPA6140A2 has extremely low power consumption that enables much longer battery life in portable applications.

        TPA6140A2評估模塊特性:

        Highly Power-Efficient Class-G Operation

        DirectPath Ground-Referenced Outputs

        Power Supply Voltage Range: 2.5 V to 5.5 V

        I2C Volume Control: -59 dB to +4 dB Gain Range

        Separate SGND Input for Preventing Ground Loop Noise

        High Power Supply Rejection Ratio

        Differential Inputs for Maximum Noise Rejection

        Advanced Pop and Click Suppression Circuitry

        High-Impedance Output Mode

        Tiny 1.6 mm x 1.6 mm 16-WCSP (0.4mm pitch)

        TI TPA6140A2 G類立體聲耳機放大電路設計
        圖4.TPA6140A2EVM帶YFF器件的電路圖

        TPA6140A2EVM元件列表:

        TI TPA6140A2 G類立體聲耳機放大電路設計


        評論


        相關推薦

        技術專區

        關閉
        主站蜘蛛池模板: 陇川县| 丰县| 榆中县| 山东省| 若尔盖县| 惠州市| 乌海市| 许昌市| 宕昌县| 额济纳旗| 那坡县| 澄江县| 乌海市| 包头市| 建昌县| 龙海市| 湖北省| 长泰县| 铜陵市| 铜鼓县| 温州市| 海宁市| 张家川| 井陉县| 墨竹工卡县| 正蓝旗| 饶河县| 西城区| 迁西县| 盐亭县| 丹东市| 元阳县| 宁德市| 彝良县| 奉化市| 宁乡县| 红原县| 高平市| 虹口区| 池州市| 邵武市|