混合型多電平逆變器電路設計研究
加入技術交流群
5、結論
本文針對混合電平式逆變器和混合單元式逆變器存在的高壓單元功率器件電壓應力過高、低壓單元電流倒灌的問題，提出了高壓單元采用二極管箝位型拓撲結構，選取各單元適當電壓比的設計方法，經分析及仿真實驗表明，該方法在克服電壓應力過高、消除低壓單元電流倒灌方面是有效的。
參考文獻：
1.Rodriguez.J,Lai.J.S,Peng.F.Z. Multilevel Inverters:A Survey of Topologies, Control, and Applications[J]. IEEE Trans Indus Electron, 2002,49(4):724-737
2.Tolbert.L.M, Peng.F.Z,, Habetler.T.G. Multilevel converters for large electric drives[J]. IEEE Trans. Ind. Applicat. 1999,35(1):36-44
3.A. Nabae, I. Takahashi, and H. Akagi, A New Neutral-Point Clamped PWM Inverter[A], IEEE IAS. 1980:761-766.
4.T.A. Meynard, H. Forch. Multi-level conversion: high voltage choppers and voltage-source inverters[A]. IEEE PESC 1992:397-403
5.Madhav D. Manjrekar, Thomas A. Lipo. A hybrid multilevel inverter topology for drive applications[A]. IEEE APEC 1998:523-529.
6.T. A. Lipo and M. D. Manjrekar. Hybrid topology for multilevel power conversion [P]. U. S. Patent 6005788, 1999
7.Keith Corzine, Yakov Familiant. A New Cascaded Multilevel H-Bridge Drive[J], IEEE Trans. Power Electron, 2002,17(1):125-131
8.Cassiano Rech, Humberto Pinheiro, Hilton A. Gründling, etc. Analysis and comparison of hybrid multilevel voltage source inverters[A]. IEEE PESC 2002:491-496
9.M.R.Pavan Kumar, J.M.S.Kim, A hybrid multi-level switching converter for ring-magnet power supplies[J]. IEEE Trans. Nuclear Science, 1996, 43(3):1876-1883.
10.丁凱 鄒云屏 王展 吳智超等，一種適用于高壓大功率的新型混合二極管鉗位級聯多電平變換器[J].中國電機工程學報, 2004.24(9):62-67
11.Peter K. Steimer，Madhav D. Manjrekar. Practical medium voltage converter topologies for high power applications[A]. IEEE IAS 2001:1723-1730
評論