新聞中心

        EEPW首頁 > 模擬技術 > 設計應用 > RJ11連接器與電話接口詳細介紹

        RJ11連接器與電話接口詳細介紹

        作者: 時間:2012-04-14 來源:網絡 收藏
        0px; WHITE-SPACE: normal; LETTER-SPACING: normal; BACKGROUND-COLOR: rgb(255,255,255); orphans: 2; widows: 2; -webkit-text-size-adjust: auto; -webkit-text-stroke-width: 0px">還有一種8P8C稱為RJ61,用于連接雙絞線對,線序如下:

        因為這種線序中第3、4對雙絞線中的兩線相距較遠,會引起較大的串擾,不適合Ethernet這種高頻信號的傳輸。
        還有一種RJ48,也是8P8C,可用于連接4對T1數據鏈路,每對線可傳輸時分復用的23個話路。

        其他不太常用的RJ系列還有:
        RJ2MB: 50-pin miniature ribbon connector
        RJ12C/RJ12W: 6P6C, for one telephone line ahead of the key system
        RJ13C/RJ13W: 6P4C, for one telephone line behind the key system
        RJ15C: 3-pin weatherproof, for one telephone line
        RJ18C/RJ18W : 6P6C, for one telephone line with make-busy arrangement
        RJ21X: 50-pin miniature ribbon connector, for up to 25 lines
        RJ26X: 50-pin miniature ribbon connector, for multiple data lines RJ27X: 50-pin miniature ribbon connector, for multiple data lines
        RJ31X: 8P8C (usually only 4C are used), single line with alarm - center pins #4 #5 connect to phone line; outside pins #1 #8 connect to another phone jack allowing the alarm dialer or medical alert system to dial the monitoring company when triggered.
        RJ38X: 8P8C, similar to RJ31 but a connection between pin #2 #7 indicates that a plug is inserted.
        RJ41S: 8P8C keyed, for one data line, universal
        RJ45S: 8P2C + keyed, for one data line with programming resistor
        RJ49C: 8P8C, for ISDN BRI via NT1
        RJ50: 10P10C, same size as RJ45 but with ten contacts Business phone
        RJ71C: 12 line series connection using 50 pin connector

        雙絞線傳輸器相關文章:雙絞線傳輸器原理

        上一頁 1 2 下一頁

        評論


        相關推薦

        技術專區

        關閉
        主站蜘蛛池模板: 广汉市| 胶南市| 高平市| 始兴县| 清水县| 尉犁县| 浦县| 凌源市| 潞西市| 崇信县| 绥棱县| 资兴市| 楚雄市| 唐山市| 桦甸市| 龙游县| 定远县| 龙口市| 万年县| 安庆市| 河间市| 尚义县| 舟曲县| 德阳市| 绥滨县| 宁阳县| 海门市| 南木林县| 洛隆县| 临邑县| 隆化县| 卫辉市| 宣化县| 沂源县| 岫岩| 新平| 金乡县| 武胜县| 东阳市| 德庆县| 城市|