S3C2410的WINCE BSP添加串口支持

s2410INT->rINTMSK = ~BIT_UART1;

break;

搜索：

void

OEMInterruptDisable(DWORD idInt) // @parm Interrupt ID to be disabled. See

還是這一句：case SYSINTR_SERIAL:

在其后面添加：

case SYSINTR_SERIAL1:

s2410INT->rINTMSK |= BIT_UART1;

s2410INT->rINTSUBMSK |= INTSUB_RXD1;

s2410INT->rINTSUBMSK |= INTSUB_TXD1;

s2410INT->rINTSUBMSK |= INTSUB_ERR1;

break;

搜索：

void

OEMInterruptDone(DWORD idInt) // @parm Interrupt ID. See

依舊找到case SYSINTR_SERIAL:

在其后面添加：

case SYSINTR_SERIAL1:

s2410INT->rINTMSK = ~BIT_UART1;

s2410INT->rINTSUBMSK = ~INTSUB_RXD1;

break;

6、打開armint.c文件。

搜索：else if(IntPendVal == INTSRC_UART0)

在其后面添加：

else if(IntPendVal == INTSRC_UART1)

{

SubIntPendVal = s2410INT->rSUBSRCPND;

// Note that we only mask the sub source interrupt - the serial driver will clear the

// sub source pending register.

//

if(SubIntPendVal INTSUB_ERR1)

{

s2410INT->rINTSUBMSK |= INTSUB_ERR1;

}

else if(SubIntPendVal INTSUB_RXD1)

{

s2410INT->rINTSUBMSK |= INTSUB_RXD1;

}

else if(SubIntPendVal INTSUB_TXD1)

{

s2410INT->rINTSUBMSK |= INTSUB_TXD1;

}

else

{

return(SYSINTR_NOP);

}

// NOTE: Don't clear INTSRC:UART1 here - serial driver does that.

//

s2410INT->rINTMSK |= BIT_UART1;

if (s2410INT->rINTPND BIT_UART1) s2410INT->rINTPND = BIT_UART1;

return(SYSINTR_SERIAL1);

}

7、打開smdk2410.cec文件，添加UART1這個feature。

搜索

ComponentType

(

Name ( Serial )

GUID ( {6563AD6C-E71C-11D4-B892-0050FC049781} )

MaxResolvedImpsAllowed( 999 )

Implementations

(

Implementation

(

Name ( S32410 Serial UART )

在其后面添加：

Implementation

(

Name ( S32410 Serial UART1 )

GUID ( {7C4427A5-286C-4C7A-B687-4E3B364D079B} )

Description ( Samsung S32410 serial UART controller. )

BSPPlatformDir ( smdk2410 )

Version ( 5.0.0.0 )

Locale ( 0409 )

Vendor ( Microsoft )

Date ( 2003-1-13 )

SizeIsCPUDependent( 1 )

BuildMethods

(

BuildMethod

(

GUID ( {07DA2083-6261-4ED6-B5BB-70CF4D930D68} )

Step ( BSP )

CPU ( ARMV4 )

CPU ( ARMV4I )

Action ( '#BUILD(SOURCES,$(_WINCEROOT)PLATFORMSMDK2410driversserial)')

)

)

)

我感覺這個改不改沒什么關系，反正網上有人這樣改了，我也就改了，但是實際內核定制時中并沒有添加上這個feature。

到這里，整個過程就結束了，耗費了我整整一天!其實改動量并不大，但是調試一次光編譯就要15分鐘，還要下載，燒寫，啟動～唉，沒有仿真器就是麻煩。調了好多次沒有成功，就是在注冊表的中斷號那兒出了問題!