H-Jtag V1.0 燒寫NOR Flash

1. 打開(kāi)H-Jtag-Server

Init->load，選擇初始化腳本“FriendlyARM2440.his”->打開(kāi)

2. 菜單中選擇“Settting”->USB/LPT Selectiojn，選擇 LPT

3. 菜單中選擇“Settting”->LPT JTAG Setting，做如下設(shè)置

4. 菜單中選擇“Control”->LPT JTAG Setting