wpa_supplicant編譯和配置運行

從https://w1.fi/wpa_supplicant/（git地址git://w1.fi/hostap.git）下載最新的wpa_supplicant源碼壓縮包，目前最新的為版本2.5. wpa_supplicant的編譯依賴于openssl和libnl庫（Netlink Protocol Library Suite (libnl)），openssl是ssl協議的開源庫(OpenSSL, Secure Sockets Layer (SSL v2/v3) Transport Layer Security (TLS v1)).（壓縮包地址：http://www.openssl.org/source/，Git地址：https://github.com/openssl/openssl），libnl是網絡相關的庫（壓縮包地址：http://www.infradead.org/~tgr/libnl/，Git地址 ：http://git.infradead.org/users/tgr/libnl.git）。

編譯libnl

解壓源代碼包。進入libnl目錄，執行./configure配置編譯環境；執行make進行編譯

然后執行sudo make install，libnl.so會被安裝至/usr/local/lib/目錄下，相應的頭文件也會被copy到/usr/local/include/netlink下。

如果報出編譯錯誤：“../include/netlink_local.h:218:error ULONG_MAX undeclared"，我們?cè)趯?duì)應文件添加一個頭文件#include即可解決問題；

編譯openssl

進入openssl目錄，./config shared #一定要加shared,否則編譯出來的是靜態庫。執行make進行編譯，完成后執行make install，編譯好的openssl庫和頭文件等被安裝在目錄/usr/local/ssl下

If you want to disable installing the static libraries, use this sed:

Now, as therootuser:

編譯wpa_supplicant

添加修改配置文件

進入wpa_supplicant/wpa_supplicant目錄，執行cp defconfig .config拷貝生成編譯配置，然后修改配置文件.config，

#如果選擇的不是libnl的1.0版本，需要根據libnl的版本打開下面的選項

CONFIG_LIBNL32=y

CONFIG_LIBNL20=y選擇libnl的版本

#添加openssl和libnl的頭文件和庫文件目錄，更新編譯鏈接環境變量

CFLAGS += -I/usr/local/ssl/include
CFLAGS += -I/usr/local/include/ libnl3
CFLAGS += -I/usr/local/include/netlink
LIBS += -L/usr/local/ssl/lib
LIBS += -L/usr/local/lib
LIBS_p += -L/usr/local/ssl/lib#不加此行，編wpa_passphrase出錯。

cp defconfig .config

make CC=arm-linux-gnueabi-gcc

make install DESTDIR=/home/export/rootfs

執行make進行編譯

成功后生成三個目標文件wpa_supplicant, wpa_cli, wpa_passphrase，至此編譯完成。

運行wpa_supplicant

需要保證libssl庫在我們的搜索路徑里，否則不做處理，會出現找不到libnl, ssl和crypto庫的錯誤。

./wpa_supplicant

./wpa_supplicant: error while loading shared libraries: libssl.so.1.1.0: cannot open shared object file: No such file or directory

將/usr/local/ssl/lib下的libssl.so.x.x.x和libcrypto.so.xxx拷貝到/lib目錄下即可，或者：export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/ssl/lib，或者在/etc/ld.so.conf文件中添加庫的搜索路徑。(或者在/etc/ld.so.conf.d下新建一個.conf文件，將搜索路徑一行一個加入).

cp /usr/arm-linux-gnueabi/lib/libnl.so.1.1.4 /home/export/rootfs/lib/

cp /usr/arm-linux-gnueabi/lib/libcrypto.so.1.0.0 /home/export/rootfs/lib/

cp /usr/arm-linux-gnueabi/lib/libssl.so.1.0.0 /home/export/rootfs/lib/

配置wpa_supplicant

wpa_supplicant runs as a daemon and requires a configuration file. Create a file called /etc/wpa_supplicant.conf with the following contents:

network={

ssid="MySSID"

key_mgmt=WPA-PSK

proto=RSN

pairwise=CCMP TKIP

psk="MyPassPhrase"

}

The above file works with both WPA (TKIP) and WPA2 (CCMP/AES). Please insert your access point name at MySSID and your pass phrase at MyPassPhase.

Once configured, wpa_supplicant can be started using:

wpa_supplicant -B -i wlan0 -c /etc/wpa_supplicant.conf

編譯錯誤處理

Error#1

#######################################################################
CC ../src/drivers/driver_wired.c
../src/drivers/driver_nl80211.c:25:31: fatal error: netlink/genl/genl.h: No such file or directory
compilation terminated.
make: *** [../src/drivers/driver_nl80211.o] Error 1
#######################################################################

Solution #1
sudo apt-get -y install libssl-dev libnl-3-dev
echo CFLAGS +=-I/usr/include/libnl3/ >> .config

make

Error#2
../src/drivers/driver_nl80211.c:95:9: warning: passing argument 1 of ‘genl_ctrl_alloc_cache’ from incompatible pointer type [enabled by default]
/usr/include/libnl3/netlink/genl/ctrl.h:25:14: note: expected ‘struct nl_sock *’ but argument is of type ‘struct nl_handle *’
../src/drivers/driver_nl80211.c:95:9: error: too few arguments to function ‘genl_ctrl_alloc_cache’
/usr/include/libnl3/netlink/genl/ctrl.h:25:14: note: declared here

Solution #2

sudo apt-get install libnl-genl-3-dev
echo CONFIG_LIBNL32=y >> .config

make
Usage

usage:
wpa_supplicant [-BddhKLqqtvW] [-P] [-g]
[-G]
-i -c [-C] [-D] [-p]
[-b] [-e]
[-o] [-O]
[-N -i -c [-C] [-D]
[-p] [-b] [-I] …]

drivers:
nl80211 = Linux nl80211/cfg80211
wext = Linux wireless extensions (generic)
wired = Wired Ethernet driver
options:
-b = optional bridge interface name
-B = run daemon in the background
-c = Configuration file
-C = ctrl_interface parameter (only used if -c is not)
-i = interface name
-I = additional configuration file
-d = increase debugging verbosity (-dd even more)
-D = driver name (can be multiple drivers: nl80211,wext)
-e = entropy file
-g = global ctrl_interface
-G = global ctrl_interface group
-K = include keys (passwords, etc.) in debug output
-t = include timestamp in debug messages
-h = show this help text
-L = show license (BSD)
-o = override driver parameter for new interfaces
-O = override ctrl_interface parameter for new interfaces
-p = driver parameters
-P = PID file
-q = decrease debugging verbosity (-qq even less)
-v = show version
-W = wait for a control interface monitor before starting
-N = start describing new interface
example:
wpa_supplicant -Dnl80211 -iwlan0 -c/etc/wpa_supplicant.conf

wpa_cli [-pctrl sockets>] [-i] [-hvB] [-a]
[-P] [-g] [-G] [command..]
-h = help (show this usage text)
-v = shown version information
-a = run in daemon mode executing the action file based on events from
wpa_supplicant
-B = run a daemon in the background
default path: /var/run/wpa_supplicant
default interface: first interface found in socket path
commands:
status [verbose] = get current WPA/EAPOL/EAP status
ifname = get current interface name
ping = pings wpa_supplicant
relog = re-open log-file (allow rolling logs)
note = add a note to wpa_supplicant debug log
mib = get MIB variables (dot1x, dot11)
help [command] = show usage help
interface [ifname] = show interfaces/select interface
level = change debug level
license = show full wpa_cli license
quit = exit wpa_cli
set = set variables (shows list of variables when run without arguments)
get = get information
logon = IEEE 802.1X EAPOL state machine logon
logoff = IEEE 802.1X EAPOL state machine logoff
pmksa = show PMKSA cache
reassociate = force reassociation
preauthenticate = force preauthentication
identity = configure identity for an SSID
password = configure password for an SSID
new_password = change password for an SSID
pin = configure pin for an SSID
otp = configure one-time-password for an SSID
passphrase = configure private key passphrase
for an SSID
sim = report SIM operation result
bssid = set preferred BSSID for an SSID
blacklist = add a BSSID to the blacklist
blacklist clear = clear the blacklist
blacklist = display the blacklist
log_level [] = update the log level/timestamp
log_level = display the current log level and log options
list_networks = list configured networks
select_network = select a network (disable others)
enable_network = enable a network
disable_network = disable a network
add_network = add a network
remove_network = remove a network
set_network = set network variables (shows
list of variables when run without arguments)
get_network = get network variables
list_creds = list configured credentials
add_cred = add a credential
remove_cred = remove a credential
set_cred = set credential variables
save_config = save the current configuration
disconnect = disconnect and wait for reassociate/reconnect command before
connecting
reconnect = like reassociate, but only takes effect if already disconnected
scan = request new BSS scan
scan_results = get latest scan results
bss < | > = get detailed scan result info
get_capability = get capabilies
reconfigure = force wpa_supplicant to re-read its configuration file
terminate = terminate wpa_supplicant
interface_add
= adds new interface, all parameters but
are optional
interface_remove = removes the interface
interface_list = list available interfaces
ap_scan = set ap_scan parameter
scan_interval = set scan_interval parameter (in seconds)
bss_expire_age = set BSS expiration age parameter
bss_expire_count = set BSS expiration scan count parameter
bss_flush = set BSS flush age (0 by default)
stkstart = request STK negotiation with
ft_ds = request over-the-DS FT with
wps_pbc [BSSID] = start Wi-Fi Protected Setup: Push Button Configuration
wps_pin [PIN] = start WPS PIN method (returns PIN, if not hardcoded)
wps_check_pin = verify PIN checksum
wps_cancel Cancels the pending WPS operation
wps_reg = start WPS Registrar to configure an AP
wps_ap_pin [params..] = enable/disable AP PIN
wps_er_start [IP address] = start Wi-Fi Protected Setup External Registrar
wps_er_stop = stop Wi-Fi Protected Setup External Registrar
wps_er_pin = add an Enrollee PIN to External Registrar
wps_er_pbc = accept an Enrollee PBC using External Registrar
wps_er_learn = learn AP configuration
wps_er_set_config = set AP configuration for enrolling
wps_er_config = configure AP
ibss_rsn = request RSN authentication with in IBSS
sta = get information about an associated station (AP)
all_sta = get information about all associated stations (AP)
deauthenticate = deauthenticate a station
disassociate = disassociate a station
chan_switch [sec_channel_offset=] [center_freq1=] [center_freq2=] [bandwidth=] [blocktx] [ht|vht] = CSA parameters
suspend = notification of suspend/hibernate
resume = notification of resume/thaw
drop_sa = drop SA without deauth/disassoc (test command)
roam = roam to the specified BSS
p2p_find [timeout] [type=*] = find P2P Devices for up-to timeout seconds
p2p_stop_find = stop P2P Devices search
p2p_connect <“pbc”|PIN> [ht40] = connect to a P2P Device
p2p_listen [timeout] = listen for P2P Devices for up-to timeout seconds
p2p_group_remove = remove P2P group interface (terminate group if GO)
p2p_group_add [ht40] = add a new P2P group (local end as GO)
p2p_prov_disc = request provisioning discovery
p2p_get_passphrase = get the passphrase for a group (GO only)
p2p_serv_disc_req = schedule service discovery request
p2p_serv_disc_cancel_req = cancel pending service discovery request
p2p_serv_disc_resp

ctrl_interface=/var/run/wpa_supplicantctrl_interface_group=0eapol_version=1# ap_scan=2 was the one for me you may try 0 or 1 indstead of 2ap_scan=2fast_reauth=1network={ssid="my_network"proto=WPAkey_mgmt=WPA-PSKpairwise=TKIPgroup=TKIPpsk="secret_password"}

ctrl_interface=/var/run/wpa_supplicantctrl_interface_group=0ap_scan=1network={ssid="my_network"proto=RSNkey_mgmt=WPA-PSKpairwise=CCMP TKIPgroup=CCMP TKIPpsk="secret_password"}

##net#modules=( "wpa_supplicant" )wpa_supplicant_ath0="-Dmadwifi"modules=( "wpa_supplicant" )wpa_timeout_ath0=60config_ath0=(" netmask 255.255.255.0")routes_ath0=("default gw ")