基于MFRC530設計的ISO14443A無接觸讀卡技術
加入技術交流群
The MF RC530 supports all layers of the ISO14443A communication scheme.
The MF RC530 supports contactless communication using MIFARE® Higher Baudrates.
The internal transmitter part is able to drive an antenna designed for proximity operating distance (up to 100 mm) directly without additional active circuitry.
The receiver part provides a robust and efficient implementation of a demodulation and decoding circuitry for signals from ISO14443A compatible transponders.
The digital part handles the complete ISO14443A framing and error detection (Parity CRC). Additionally it supports the fast MIFARE® Classic security algorithm to authenticate MIFARE Classic (e.g. MIFARE® Standard, MIFARE® Light) products.
A comfortable parallel interface, which can be directly connected to any 8-bit μ-Processor gives high flexibility for the reader/terminal design. Additionally a SPI compatible interface is supported.
MF RC530主要特性:
Highly integrated analog circuitry to demodulate and decode card response
Buffered output drivers to connect an antenna with minimum number of external components
Proximity operating distance (up to 100 mm)
Supports ISO 14443A
Supports MIFARE® Dual Interface Card ICs and supports MIFARE® Classic protocol
Supports contactless communication with higher baudrates up to 424kbaud
Crypto1 and secure non-volatile internal key memory
Pin-compatible to the MF RC500, MF RC531, SL RC400 and CL RC632
Parallel μ-Processor interface with internal address latch and IRQ line
SPI compatible interface
Flexible interrupt handling
Automatic detection of parallel μ-Processor interface type
Comfortable 64 byte send and receive FIFO-buffer
Hard reset with low power function
Power down mode per software
Programmable timer
Unique serial number
User programmable start-up configuration
Bit- and byte-oriented framing
Independent power supply pins for digital, analog and transmitter part
Internal oscillator buffer to connect 13.56 MHz quartz, optimised for low phase jitter
Clock frequency filtering
3.3 V to 5 V operation for transmitter (antenna driver) in short range and proximity applications
3.3 V or 5V operation for the digital part
圖1.MF RC530方框圖
評論