新聞中心

        EEPW首頁 > 嵌入式系統 > 設計應用 > 基于CC430設計的超低功耗MCU射頻應用方案

        基于CC430設計的超低功耗MCU射頻應用方案

        作者: 時間:2011-09-29 來源:網絡 收藏

        系列是TI公司的集成了RF收發器的系統級芯片(SoC),器件具有功能強大的MSP430? 16位RISC CPU,16位居寄存器,以及常數發生器,以得到最高的代碼效率.工作電壓1.8V-3.6V,CPU工作時的功耗160 μA/MHz,主要用在建筑物自動化,測試測量和財產跟蹤.本文介紹主要特性, F613x和CC430F513x的功能方框圖, 小于1GHz無線電方框圖,以及CC430F61xx和CC430F51xx的典型應用電路圖與材料清單.

        The Texas Instruments CC430 family of ultralow-power microcontroller system-on-chip with integrated RF transceiver cores consists of several devices featuring different sets of peripherals targeted for a wide range of applications. The architecture, combined with five low-power modes is optimized to achieve extended battery life in portable measurement applications. The device features the powerful MSP430? 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency.

        The CC430 family provides a tight integration between the microcontroller core, its peripherals, software, and the RF transceiver, making these true system-on-chip solutions easy to use as well as improving performance.

        CC430主要特性:

        True System-on-Chip (SoC) for Low-Power Wireless Communication Applications

        Wide Supply Voltage Range: 1.8 V to 3.6 V

        Ultralow Power Consumption:

        CPU Active Mode (AM): 160 μA/MHz

        Standby Mode (LPM3 RTC Mode):2.0 μA

        Off Mode (LPM4 RAM Retention): 1.0 μA

        Radio in RX: 15 mA, 250kbps, 915MHz

        MSP430 System and Peripherals

        16-Bit RISC Architecture, Extended Memory, 50-ns Instruction Cycle Time

        Wake-Up From Standby Mode in Less Than6 μs

        Flexible Power Management System with SVS and Brownout

        Unified Clock System with FLL

        16-Bit Timer TA0, Timer_A with Five Capture/Compare Registers

        16-Bit Timer TA1, Timer_A with Three Capture/Compare Registers

        Hardware Real-Time Clock

        Two Universal Serial Communication Interfaces

        USCI_A0 supporting UART, IrDA, SPI

        USCI_B0 supporting I2C, SPI

        12-Bit A/D Converter With Internal Reference, Sample-and-Hold, and Autoscan Features (Only CC430F613x and CC430F513x) Comparator

        The CC430 has one active mode and five software selectable low-power modes of operation. An interrupt event can wake up the device from any of the low-power modes, service the request, and restore back to the low-power mode on return from the interrupt program.

        The following six operating modes can be configured by software:

        ? Active mode (AM)

        – All clocks are active

        ? Low-power mode 0 (LPM0)

        – CPU is disabled

        – ACLK and SMCLK remain active, MCLK is disabled

        – FLL loop control remains active

        ? Low-power mode 1 (LPM1)

        – CPU is disabled

        – FLL loop control is disabled

        – ACLK and SMCLK remain active, MCLK is disabled

        ? Low-power mode 2 (LPM2)

        – CPU is disabled

        – MCLK and FLL loop control and DCOCLK are disabled

        – DCO’s dc-generator remains enabled

        – ACLK remains active

        ? Low-power mode 3 (LPM3)

        – CPU is disabled

        – MCLK, FLL loop control, and DCOCLK are disabled

        – DCO’s dc-generator is disabled

        – ACLK remains active

        ? Low-power mode 4 (LPM4)

        – CPU is disabled

        – ACLK is disabled

        – MCLK, FLL loop control, and DCOCLK are disabled

        – DCO’s dc-generator is disabled

        – Crystal oscillator is stopped

        – Complete data retention

        圖1.CC430F613x功能方框圖

        圖2. CC430F612x功能方框圖

        圖3. CC430F513x功能方框圖

        圖4. 小于1GHz無線電方框圖

        圖5. CC430F61xx典型應用電路圖

        圖6. CC430F51xx典型應用電路圖

        應用電路圖材料清單:



        評論


        技術專區

        關閉
        主站蜘蛛池模板: 浦县| 德庆县| 汉沽区| 微山县| 通许县| 中阳县| 普格县| 若羌县| 凭祥市| 云南省| 旌德县| 卫辉市| 庄浪县| 五寨县| 赞皇县| 册亨县| 青海省| 旬阳县| 刚察县| 腾冲县| 四会市| 泰州市| 大兴区| 安塞县| 大新县| 南京市| 镇原县| 长宁县| 赣榆县| 临沧市| 万载县| 古浪县| 平阴县| 门源| 宁海县| 得荣县| 司法| 本溪市| 福鼎市| 广东省| 平谷区|