C8051F330 16*16點陣（SPI 、SMBus、I2C）PCF8563

#include
#include
#include
#include
#include

#define SPEED 2000
#define TIME 1800
#define uint unsigned int
#define uchar unsigned char

#define BLKN 2 //用于點陣列掃描的595的個數
#define TOTAL 26 //待顯示的字數
#define CONIO P1

uchar number;//d=0,
uchar control=0,choose,send;
uchar receive_number=3,send_number=0;

bit BUSY;
bit SMB_RW;

uchar hou=0;
uchar min=0;
uchar sec=0;

uchar sg;//時高位
uchar sd;//時低位

uchar fg;//分高位
uchar fd;//分低位

uchar mg;//秒高位
uchar md;//秒低位

sbit CLK=P1^7; //輸出脈沖
sbit scyx=P1^6; //復位
sbit led=P0^7;
sbit pcf8563_scl=P0^5;//時鐘頻率
sbit pcf8563_sda=P0^4;//串行數據傳輸腳

uchar idata dispram[(BLKN/2)*32]={0};

uchar receive1[3]={0x00,0x00,0x00};//時、分、秒
uchar send1[4]={0x02,0x33,0x25,0x03};//時、分、秒、器件地址
/*********************************字模表***************************************/
uchar code Bmp[][32]={
{0x00,0x00,0x00,0x00,0x00,0x00,0x07,0xF0,0x1C,0x18,0x38,0x1C,0x38,0x0E,0x38,0x0E,
0x78,0x0E,0x38,0x0E,0x38,0x0E,0x38,0x1C,0x1C,0x18,0x07,0xF0,0x00,0x00,0x00,0x00},
/***數字0***/
{0x00,0x00,0x00,0x00,0x00,0x00,0x01,0xC0,0x0F,0xC0,0x01,0xC0,0x01,0xC0,0x01,0xC0,
0x01,0xC0,0x01,0xC0,0x01,0xC0,0x01,0xC0,0x01,0xC0,0x0F,0xFC,0x00,0x00,0x00,0x00},
/***數字1***/
{0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xF8,0x18,0x1C,0x38,0x1C,0x18,0x1C,0x00,0x38,
0x00,0x70,0x01,0xC0,0x07,0x00,0x0C,0x06,0x3F,0xFC,0x3F,0xFC,0x00,0x00,0x00,0x00},
/***數字2***/
{0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xF0,0x38,0x38,0x38,0x1C,0x00,0x38,0x03,0xF0,
0x03,0xF0,0x00,0x1C,0x00,0x0E,0x38,0x1C,0x38,0x1C,0x0F,0xF0,0x00,0x00,0x00,0x00},
/***數字3***/
{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x00,0xF0,0x01,0xF0,0x03,0x70,0x0C,0x70,
0x18,0x70,0x30,0x70,0x3F,0xFE,0x00,0x70,0x00,0x70,0x03,0xFE,0x00,0x00,0x00,0x00},
/***數字4***/
{0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0xFC,0x18,0x00,0x18,0x00,0x18,0xC0,0x1F,0xF8,
0x18,0x1C,0x00,0x1E,0x10,0x0E,0x38,0x1C,0x38,0x18,0x0F,0xF0,0x00,0x00,0x00,0x00},
/***數字5***/
{0x00,0x00,0x00,0x00,0x00,0x00,0x07,0xF8,0x0C,0x3C,0x18,0x08,0x38,0x00,0x3F,0xF8,
0x7C,0x1C,0x78,0x0E,0x38,0x0E,0x38,0x0E,0x1C,0x1C,0x07,0xF0,0x00,0x00,0x00,0x00},
/***數字6***/
{0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0xFE,0x3C,0x0C,0x30,0x18,0x00,0x30,0x00,0x60,
0x00,0xC0,0x01,0xC0,0x03,0x80,0x03,0x80,0x03,0x80,0x03,0x80,0x00,0x00,0x00,0x00},
/***數字7***/
{0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xF8,0x38,0x0C,0x30,0x0E,0x3C,0x0C,0x1F,0xF8,
0x0F,0xF0,0x38,0x3C,0x30,0x0E,0x70,0x0E,0x38,0x0C,0x0F,0xF0,0x00,0x00,0x00,0x00},
/***數字8***/
{0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xF0,0x38,0x18,0x30,0x0C,0x70,0x0E,0x30,0x0E,
0x38,0x3E,0x1F,0xEE,0x00,0x1C,0x18,0x18,0x3C,0x30,0x1F,0xE0,0x00,0x00,0x00,0x00},
/***數字9***/

{0x00,0x40,0x40,0x40,0x30,0x40,0x10,0x40,0x00,0x48,0x00,0x7C,0xF0,0x40,0x10,0x40,
0x10,0x40,0x10,0x40,0x10,0x40,0x12,0x40,0x14,0x40,0x18,0x44,0x17,0xFE,0x00,0x00},//讓

{0x00,0x08,0x3F,0xFC,0x21,0x08,0x21,0x08,0x21,0x08,0x3F,0xF8,0x21,0x08,0x21,0x08,
0x21,0x08,0x3F,0xF8,0x20,0x08,0x02,0x00,0x51,0x88,0x50,0x96,0x90,0x12,0x0F,0xF0},//思

{0x10,0x80,0x10,0xA0,0x20,0x94,0x21,0xFE,0x49,0x10,0xFB,0x10,0x15,0xFC,0x21,0x10,
0x41,0x10,0xFD,0xFC,0x01,0x10,0x01,0x10,0x1D,0x14,0xE1,0xFE,0x41,0x00,0x01,0x00},//維

{0x01,0x20,0x41,0x24,0x2F,0xFE,0x21,0x24,0x01,0x24,0x8F,0xFC,0x49,0x24,0x09,0x20,
0x1F,0xFE,0x29,0x22,0xE1,0x22,0x21,0x2A,0x22,0x24,0x22,0x20,0x24,0x20,0x28,0x20},//沸

{0x00,0x40,0x7A,0x48,0x49,0x50,0x4B,0xFC,0x48,0x80,0x7F,0xFE,0x49,0x10,0x4A,0x0E,
0x4D,0xF4,0x78,0x10,0x49,0x14,0x49,0xFE,0x48,0x04,0x4F,0xE4,0x88,0x14,0x18,0x08},//騰

{0x08,0x00,0x08,0x08,0x08,0xFC,0x7E,0x08,0x08,0x08,0x08,0x08,0xFE,0xF8,0x08,0x88,
0x28,0x80,0x2E,0x84,0x28,0x84,0x28,0x7C,0x28,0x00,0x58,0x06,0x8F,0xFC,0x00,0x00},//起

{0x01,0x00,0x01,0x00,0x01,0x08,0x7F,0xFC,0x01,0x00,0x21,0x10,0x19,0x30,0x09,0x44,
0xFF,0xFE,0x03,0x80,0x05,0x40,0x09,0x30,0x31,0x1E,0xC1,0x04,0x01,0x00,0x01,0x00},//來

{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x0C,0x00,0x1E,0x00,0x1E,0x00,0x0C,0x00,0x04,0x00,0x08,0x00,0x10,0x00,0x00,0x00},//,

{0x00,0x40,0x40,0x40,0x30,0x40,0x10,0x40,0x00,0x48,0x00,0x7C,0xF0,0x40,0x10,0x40,
0x10,0x40,0x10,0x40,0x10,0x40,0x12,0x40,0x14,0x40,0x18,0x44,0x17,0xFE,0x00,0x00},//讓

{0x20,0x00,0x22,0x04,0x3F,0x7E,0x48,0x44,0x08,0x44,0xFF,0xC4,0x10,0x44,0x14,0x7C,
0x22,0x44,0x42,0x10,0x9F,0xF8,0x10,0x10,0x1F,0xF0,0x10,0x10,0x1F,0xF0,0x10,0x10},//智

{0x08,0x20,0x7E,0xFC,0x08,0x20,0x3E,0xF8,0x08,0x20,0x7E,0xFC,0x08,0x20,0x3F,0xF8,
0x00,0x08,0xFF,0xFE,0x00,0x08,0x3F,0xF8,0x09,0x00,0x28,0xA8,0x48,0x24,0x07,0xE0},//慧

{0x08,0x08,0x0B,0xFC,0x10,0x00,0x20,0x00,0x40,0x00,0x08,0x04,0x17,0xFE,0x30,0x10,
0x50,0x10,0x90,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x50,0x10,0x20},//行

{0x00,0x40,0x08,0x40,0x7C,0x40,0x00,0x44,0x05,0xFE,0xFE,0x44,0x10,0x44,0x10,0x44,
0x20,0x44,0x24,0x44,0x42,0x84,0xFE,0x84,0x41,0x04,0x01,0x04,0x02,0x28,0x04,0x10},//動

{0x08,0x00,0x08,0x08,0x08,0xFC,0x7E,0x08,0x08,0x08,0x08,0x08,0xFE,0xF8,0x08,0x88,
0x28,0x80,0x2E,0x84,0x28,0x84,0x28,0x7C,0x28,0x00,0x58,0x06,0x8F,0xFC,0x00,0x00},//起

{0x01,0x00,0x01,0x00,0x01,0x08,0x7F,0xFC,0x01,0x00,0x21,0x10,0x19,0x30,0x09,0x44,
0xFF,0xFE,0x03,0x80,0x05,0x40,0x09,0x30,0x31,0x1E,0xC1,0x04,0x01,0x00,0x01,0x00},//來

{0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x3C,0x00,0x66,0x00,0x66,0x00,0x66,0x00,0x3C,0x00,0x00,0x00},//.};

uchar code Bmp1[][32]={
{0x01,0x00,0x11,0x00,0x11,0x00,0x11,0x08,0x3F,0xFC,0x21,0x00,0x41,0x00,0x41,0x00,
0x81,0x10,0x3F,0xF8,0x01,0x00,0x01,0x00,0x01,0x00,0x01,0x04,0xFF,0xFE,0x00,0x00},

{0x00,0x10,0x1F,0xF8,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x1F,0xF0,
0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x1F,0xF0,0x10,0x10,0x00,0x00},

{0x10,0x80,0x10,0x80,0x10,0x80,0x10,0x88,0x5B,0xFC,0x54,0x88,0x50,0x88,0x90,0x88,
0x10,0x88,0x1F,0xFE,0x10,0x80,0x11,0x40,0x11,0x20,0x12,0x10,0x14,0x0E,0x18,0x04},

{0x00,0x20,0x00,0xF0,0x1F,0x00,0x10,0x00,0x11,0x00,0x11,0x00,0x21,0x04,0x7F,0xFE,
0x01,0x00,0x01,0x00,0x09,0x20,0x09,0x10,0x11,0x08,0x21,0x0C,0x45,0x04,0x02,0x00},

{0x00,0x00,0x38,0x1C,0x44,0x22,0x54,0x2A,0x44,0x22,0x37,0xEC,0x08,0x10,0x10,0x08,
0x2E,0x74,0x20,0x04,0x21,0x84,0x24,0x24,0x13,0xC8,0x08,0x10,0x07,0xE0,0x00,0x00}
};
/*********************************字模表***************************************/

/************系統函數的配置***********/
void sysclk_int(void) //內部晶振
{
OSCICL=0x83;
OSCICN=0xc3; //不分頻
CLKSEL=0x00;
}

/*
void delay1(uchar n) //延時程序
{
uchar j;
for(j=0;j {
_nop_();
_nop_();
_nop_();
_nop_();
}
}
*/

void delay(uint i) //毫秒延時
{
register uchar j;//
for(;i;i--)
for(j=0;j<255;j++);
}