STC11F04單片機制作的32燈搖搖棒
加入技術交流群
#include
/*********外部接口定義**********/
#define uchar unsigned char
#define uint unsigned int //宏定義
#define out P1 //數據輸出端口
sbit led1=P3^0; //第1組LED
sbit led2=P3^1; //第2組LED
sbit led3=P3^3; //第3組LED
sbit led4=P3^4; //第4組LED
sbit key1=P3^5; //按鍵輸入
sbit p3_2=P3^2;
uchar KY; //KY作用在后面說明
uchar BUFF; //緩存
/*********全局變量定義**********/
unsigned long int TimeCount=0;
unsigned int DelayN=80, //延時臨時計數
DelayTime=80; //每次延時的周期個數
unsigned char key;
/**********************************************/
void delay(unsigned char n);
void DelayMs(void);
/*******************************************/
unsigned char code text1[] = {
0xEF,0x7F,0xEF,0xBC,0x0F,0xDD,0xE0,0xEB,0xEF,0xF3,0x0F,0x8C,0x7F,0xDF,0x7D,0xFF,0x7D,0xBF,0x7D,0x7F,0x0D,0x80,0x75,0xFF,0x79,0xFF,0x7D,0xFF,0x7F,0xFF,0xFF,0xFF,/*"好",0*/
0xEF,0x7F,0xEF,0xBC,0x0F,0xDD,0xE0,0xEB,0xEF,0xF3,0x0F,0x8C,0x7F,0xDF,0x7D,0xFF,0x7D,0xBF,0x7D,0x7F,0x0D,0x80,0x75,0xFF,0x79,0xFF,0x7D,0xFF,0x7F,0xFF,0xFF,0xFF,/*"好",1*/
0xBF,0xFF,0xCF,0xFD,0xEF,0xFD,0xED,0xFD,0xA3,0xFD,0xAB,0xFD,0xAF,0xBD,0xAE,0x7D,0xA1,0x80,0x2B,0xFD,0xAF,0xFD,0xE7,0xFD,0xA8,0xFD,0xCD,0xFD,0xEF,0xFD,0xFF,0xFF,/*"學",2*/
0xFF,0xFF,0xFF,0xFF,0xFD,0xFB,0xFD,0xF3,0xF5,0xFB,0xED,0xFD,0xDD,0xFD,0x9D,0xFE,0xFD,0xFE,0x7D,0xFF,0x7D,0xDF,0xBD,0xBF,0xFD,0x7F,0x01,0x80,0xFF,0xFF,0xFF,0xFF,/*"習",3*/
0xFF,0xFF,0xBF,0x7F,0xBD,0xBF,0xBD,0xDF,0xBD,0xEF,0xBD,0xF7,0xBD,0xF9,0x01,0xFE,0xBD,0xFD,0xBD,0xFB,0xBD,0xF7,0xBD,0xEF,0xBD,0xCF,0xBD,0x9F,0xBF,0xDF,0xFF,0xFF,/*"天",4*/
0xFF,0xFF,0xBF,0x7F,0xBD,0xBF,0xBD,0xDF,0xBD,0xEF,0xBD,0xF7,0xBD,0xF9,0x01,0xFE,0xBD,0xFD,0xBD,0xFB,0xBD,0xF7,0xBD,0xEF,0xBD,0xCF,0xBD,0x9F,0xBF,0xDF,0xFF,0xFF,/*"天",5*/
0xFF,0xFF,0xFF,0xFF,0x03,0x80,0xFB,0xFF,0xFB,0xFF,0x19,0xF0,0xDA,0xFB,0xDB,0xFB,0xDB,0xFB,0xDB,0xFB,0x1B,0xF0,0xFB,0xDF,0xFB,0xBF,0x03,0xC0,0xFF,0xFF,0xFF,0xFF,/*"向",6*/
0xFF,0xFF,0xFF,0xBF,0xFF,0xBF,0xFF,0xBF,0xFF,0xBF,0xFF,0xBF,0xFF,0xBF,0x01,0x80,0xBF,0xBF,0xBF,0xBF,0xBF,0xBF,0xBF,0xBF,0xBF,0xBF,0xFF,0x9F,0xFF,0xBF,0xFF,0xFF,/*"上",7*/
};
評論