51單片機程序——按鍵控制數碼管變化

#include

#define uint unsigned int

#define uchar unsigned char

#define dula P0

#define wela P1

sbit key=P3^2;

unsigned char code DuanMa[]={0xff,0xc0,0xf9,0xa4,0xb0,

0x99,0x92,0x82,0xf8,

0x80,0x90,0x88,0x83,

0xa7,0xa1,0x86,0x8e};

uchar num;

void delay(uint z)

{

uint x,y;

for(x=z;x>0;x--)

for(y=110;y>0;y--);

}

void main()

{

while(1)

{

if(key==0) //延遲再判斷，確保按鍵確實被按下

{

delay(5);

if(key==0)

{

num++;

if(num==17)

num=0;

}

while(!key); 　//同理，判斷鍵盤確實已經松開

delay(5);

while(!key);

}

wela=0xff; //位選都打開，8位數碼管都顯示

dula=DuanMa[num]; //送段碼

}

}