s3c24xx中斷的操作

@ File：head.S
@ 功能：初始化，設置中斷模式、系統模式的棧，設置好中斷處理函數
@******************************************************************************

.extern main
.text
.global _start
_start:
@******************************************************************************
@ 中斷向量，本程序中，除Reset和HandleIRQ外，其它異常都沒有使用
@******************************************************************************
b Reset

@ 0x04: 未定義指令中止模式的向量地址
HandleUndef:
b HandleUndef

@ 0x08: 管理模式的向量地址，通過SWI指令進入此模式
HandleSWI:
b HandleSWI

@ 0x0c: 指令預取終止導致的異常的向量地址
HandlePrefetchAbort:
b HandlePrefetchAbort

@ 0x10: 數據訪問終止導致的異常的向量地址
HandleDataAbort:
b HandleDataAbort

@ 0x14: 保留
HandleNotUsed:
b HandleNotUsed

@ 0x18: 中斷模式的向量地址
b HandleIRQ

@ 0x1c: 快中斷模式的向量地址
HandleFIQ:
b HandleFIQ //一共有8個

Reset:
ldr sp, =4096 @ 設置棧指針，以下都是C函數，調用前需要設好棧
bl disable_watch_dog @ 關閉WATCHDOG，否則CPU會不斷重啟

//初始化必須做的事情關閉watchdog 設置棧指針

msr cpsr_c, #0xd2 @ 進入中斷模式
ldr sp, =3072 @ 設置中斷模式棧指針

msr cpsr_c, #0xdf @ 進入系統模式
ldr sp, =4096 @ 設置系統模式棧指針，
@ 其實復位之后，CPU就處于系統模式，
@ 前面的“ldr sp, =4096”完成同樣的功能，此句可省略

/ /進入各種模式在于設置棧指針

bl init_led @ 初始化LED的GPIO管腳

bl init_irq @ 調用中斷初始化函數，在init.c中
msr cpsr_c, #0x5f @ 設置I-bit=0，開IRQ中斷

ldr lr, =halt_loop @ 設置返回地址 //調用main函數前的工作
ldr pc, =main @ 調用main函數
halt_loop:
b halt_loop

HandleIRQ:
sub lr, lr, #4 @ 計算返回地址
stmdb sp!, { r0-r12,lr } @ 保存使用到的寄存器
@ 注意，此時的sp是中斷模式的sp
@ 初始值是上面設置的3072

ldr lr, =int_return @ 設置調用ISR即EINT_Handle函數后的返回地址
ldr pc, =EINT_Handle @ 調用中斷服務函數，在interrupt.c中
int_return:
ldmia sp!, { r0-r12,pc }^ @ 中斷返回

#include "s3c24xx.h"

#define GPB5_out (1<<(5*2)) // LED1
#define GPB6_out (1<<(6*2)) // LED2
#define GPB7_out (1<<(7*2)) // LED3
#define GPB8_out (1<<(8*2)) // LED4

#define GPG11_eint (2<<(11*2)) // K1,EINT19
#define GPG3_eint (2<<(3*2)) // K2,EINT11
#define GPF2_eint (2<<(2*2)) // K3,EINT2
#define GPF0_eint (2<<(0*2)) // K4,EINT0

void disable_watch_dog(void)
{
WTCON = 0; // 關閉WATCHDOG很簡單，往這個寄存器寫0即可
}

void init_led(void)
{
GPBCON = GPB5_out | GPB6_out | GPB7_out | GPB8_out ;
}

void init_irq( )
{
GPFCON = GPF0_eint | GPF2_eint;
GPGCON = GPG3_eint | GPG11_eint;

// 對于EINT11、19，需要在EINTMASK寄存器中使能它們
EINTMASK &= (~(1<<11)) & (~(1<<19));


PRIORITY = (PRIORITY & ((~0x01) | (0x3<<7))) | (0x0 << 7) ;

// EINT0、EINT2、EINT8_23使能
INTMSK &= (~(1<<0)) & (~(1<<2)) & (~(1<<5));
}

#include "s3c24xx.h"

void EINT_Handle()
{
unsigned long oft = INTOFFSET;
unsigned long val;

switch( oft )
{
// K4被按下
case 0:
{
GPBDAT |= (0x0f<<5); // 所有LED熄滅
GPBDAT &= ~(1<<8); // LED4點亮
break;
}

// K3被按下
case 2:
{
GPBDAT |= (0x0f<<5); // 所有LED熄滅
GPBDAT &= ~(1<<7); // LED3點亮
break;
}

// K1或K2被按下
case 5:
{
GPBDAT |= (0x0f<<5); // 所有LED熄滅

// 需要進一步判斷是K1還是K2，或是K1、K2被同時按下
val = EINTPEND;
if (val & (1<<11))
GPBDAT &= ~(1<<6); // K2被按下，LED2點亮
if (val & (1<<19))
GPBDAT &= ~(1<<5); // K1被按下，LED1點亮

break;
}

default:
break;
}

//清中斷
if( oft == 5 )
EINTPEND = (1<<11) | (1<<19); // EINT8_23合用IRQ5
SRCPND = 1< INTPND = 1< //清除的順序
}

int main()
{
while(1);
return 0;
}

s3c24xx.h

#define WTCON (*(volatile unsigned long *)0x53000000)

#define MEM_CTL_BASE 0x48000000
#define SDRAM_BASE 0x30000000

#define NFCONF (*(volatile unsigned int *)0x4e000000)
#define NFCMD (*(volatile unsigned char *)0x4e000004)
#define NFADDR (*(volatile unsigned char *)0x4e000008)
#define NFDATA (*(volatile unsigned char *)0x4e00000c)
#define NFSTAT (*(volatile unsigned char *)0x4e000010)

#define GPBCON (*(volatile unsigned long *)0x56000010)
#define GPBDAT (*(volatile unsigned long *)0x56000014)

#define GPFCON (*(volatile unsigned long *)0x56000050)
#define GPFDAT (*(volatile unsigned long *)0x56000054)
#define GPFUP (*(volatile unsigned long *)0x56000058)

#define GPGCON (*(volatile unsigned long *)0x56000060)
#define GPGDAT (*(volatile unsigned long *)0x56000064)
#define GPGUP (*(volatile unsigned long *)0x56000068)

#define GPHCON (*(volatile unsigned long *)0x56000070)
#define GPHDAT (*(volatile unsigned long *)0x56000074)
#define GPHUP (*(volatile unsigned long *)0x56000078)

#define ULCON0 (*(volatile unsigned long *)0x50000000)
#define UCON0 (*(volatile unsigned long *)0x50000004)
#define UFCON0 (*(volatile unsigned long *)0x50000008)
#define UMCON0 (*(volatile unsigned long *)0x5000000c)
#define UTRSTAT0 (*(volatile unsigned long *)0x50000010)
#define UTXH0 (*(volatile unsigned char *)0x50000020)
#define URXH0 (*(volatile unsigned char *)0x50000024)
#define UBRDIV0 (*(volatile unsigned long *)0x50000028)

#define SRCPND (*(volatile unsigned long *)0x4A000000)
#define INTMOD (*(volatile unsigned long *)0x4A000004)
#define INTMSK (*(volatile unsigned long *)0x4A000008)
#define PRIORITY (*(volatile unsigned long *)0x4A00000c)
#define INTPND (*(volatile unsigned long *)0x4A000010)
#define INTOFFSET (*(volatile unsigned long *)0x4A000014)
#define SUBSRCPND (*(volatile unsigned long *)0x4A000018)
#define INTSUBMSK (*(volatile unsigned long *)0x4A00001c)

#define EINTMASK (*(volatile unsigned long *)0x560000a4)
#define EINTPEND (*(volatile unsigned long *)0x560000a8)