執行nand probe 0 提示找不到NAND flash device . 解決辦法

> halt

target state: halted

target halted in ARM state due to debug-request, current mode: Abort

cpsr: 0x400001d7 pc: 0x00000010

> nand probe 0

unknown NAND flash device found, manufacturer id: 0x18 device id: 0x18

in procedure nand

上述提示錯誤信息為找不到NAND flash 器件。解決辦法如下：：：

> arm mcr 15 0 1 0 0 0

> step 0

target state: halted

target halted in ARM state due to single-step, current mode: Abort

cpsr: 0x400001d7 pc: 0x00000004

> nand probe 0

unknown NAND flash device found, manufacturer id: 0x0c device id: 0x0c

in procedure nand

> step 1

target state: halted

target halted in ARM state due to single-step, current mode: Abort

cpsr: 0x400001d7 pc: 0x00000004

> step 4

target state: halted

target halted in ARM state due to single-step, current mode: Abort

cpsr: 0x400001d7 pc: 0x00000008

> step 8

target state: halted

target halted in ARM state due to single-step, current mode: Abort

cpsr: 0x400001d7 pc: 0x0000000c

> step 88

target state: halted

target halted in ARM state due to single-step, current mode: Abort

cpsr: 0x400001d7 pc: 0x000000b0

> step 999

target state: halted

target halted in ARM state due to single-step, current mode: Abort

cpsr: 0x400001d7 pc: 0x00000410

> step 111111

target state: halted

target halted in ARM state due to single-step, current mode: Abort

cpsr: 0x400001d7 pc: 0x0001b208

> nand probe 0

NAND flash device K9GAG08 2GB NAND 3.3V x8 MLC 2b/cell (Samsung) found

> nand erase 0 0 0x100000

s3c2440_read_block_data: reading data: 0x8a2f268, 0xbfdc5efa, 6

erased blocks 0 to 1 on NAND flash device #0 K9GAG08 2GB NAND 3.3V x8 MLC 2b/cell

這種命令的目的是要關閉MMU，

關掉后才能訪問里面的寄存器