新聞中心

        EEPW首頁 > 電源與新能源 > 設計應用 > 基于MAX17127設計的高效白光LED驅動技術

        基于MAX17127設計的高效白光LED驅動技術

        作者: 時間:2010-06-24 來源:網絡 收藏

        是Maxim公司的(W)器,它的內部開關電流模式升壓轉換器能陣列,多達并聯6串LED,每串13個LED.每串電流匹配達到±2%,輸入電壓5V-26V,可調電流從10mA到30mA. 可調開關頻率從250kHz 到1MHz.主要用在汽車電子系統,手持終端以及筆桿子電腦和便攜式計算機顯示器.本文介紹了主要特性,功能方框圖,以及典型應用電路.

        The is a high-efficiency driver for white light-emitting diodes (LEDs). It is designed for large liquid-crystal displays (LCDs) that employ an array of LEDs as the light source. An internal switch current-mode step-up converter drives the LED array, which can be configured for up to six strings in parallel and 13 LEDs per string. Each string is terminated with ballast that achieves ±2% current-regulation accuracy, ensuring even LED brightness. The MAX17127 has a wide input-voltage range from 5V to 26V, and provides an adjustable 10mA to 30mA full-scale LED current.

        The MAX17127 can implement brightness control through the PWM signal input, and LED current is directly controlled by the external dimming signal’s frequency and duty cycle.

        The MAX17127 has multiple features to protect the controller from fault conditions. Once an open/short string is detected, the fault string is disabled while other strings can still operate normally. The controller features cycle-by-cycle current limit to provide constant operation and soft-start capability. If the MAX17127 is in current-limit condition, the step-up converter is latched off after an internal timer expires. A thermal-shutdown circuit provides another level of protection. When thermal shutdown happens, the MAX17127 is latched off.

        The MAX17127’s step-up controller features an internal 0.12Ω (typ), 48V (max) power MOSFET with local current-sense amplifier for accurate cycle-by-cycle current limit. This architecture greatly simplifies the external circuitry and saves PCB space. Low-feedback voltage at each LED string helps reduce power loss and improve efficiency. The MAX17127 features resistor-adjustable switching frequency from 250kHz to 1MHz, which enables a wide variety of applications that can trade off component size for operating frequency.

        The MAX17127 is available in a thermally enhanced, lead-free, 20-pin, 4mm x 4mm thin QFN package.

        MAX17127主要特性:

        5V to 26V Input Supply Voltage

        Up to Six Parallel Strings Multiple Series-Connected LEDs

        250kHz to 1MHz Adjustable Switching Frequency

        0.12Ω Internal HV Power MOSFET (48V max)

        Low String Feedback Voltage: 480mV at 20mA LED Current

        Full-Scale LED Current Adjustable from 10mA to 30mA

        ±2% Current-Regulation Accuracy Between Strings

        400ns Minimum String On-Time

        100Hz to 25kHz PWM Input Range

        Open and Short LED Protection

        Output Overvoltage Protection

        Thermal Shutdown

        Small 20-Pin, 4mm x 4mm Thin QFN Package

        MAX17127應用:

        Automotive Systems

        Handy Terminals

        Notebook, Subnotebook, and Tablet Computer Displays


        圖1.MAX17127功能方框圖

        本文引用地址:http://www.104case.com/article/180734.htm


        上一頁 1 2 下一頁

        評論


        相關推薦

        技術專區

        關閉
        主站蜘蛛池模板: 交城县| 嘉定区| 石渠县| 通江县| 花莲县| 郑州市| 汶川县| 同仁县| 若羌县| 策勒县| 喀什市| 卓资县| 繁峙县| 阜南县| 江都市| 新建县| 仙居县| 会昌县| 乌拉特中旗| 南充市| 九龙坡区| 江华| 信阳市| 安徽省| 和政县| 远安县| 游戏| 深泽县| 清镇市| 来安县| 通海县| 张家口市| 达孜县| 镇沅| 仙游县| 和平县| 五指山市| 玛多县| 环江| 察雅县| 永平县|